Industrial strength one-way door for raccoons. May also be used for skunks, groundhogs, armadillos, etc.

14 ga. Mesh, 22 ga. Galv. Sheet metal housing w/ three removable flanges.

8" x 8" x 17"

This is a multi-catch, multi-use, squirrel trap. Used with the Modular Multi-Catch Squirrel System (WCSMMST) or by itself. It has the mounting flanges built on to the trap for ease of use. The trap module comes in two sizes: 4" x 4" x 17" or 5" x 5" x 24". Each is constructed of 1" x .5" mesh. The door spring is non-rusting stainless steel.

Mount over an active squirrel hole using fender washers and drywall screws through the flanges for anchoring points. These can capture up to 3 gray squirrels at a time.

This is a multi-catch, multi-use, squirrel trap. Used with the Modular Multi-Catch Squirrel System (WCSMMST) or by itself. It has the mounting flanges built on to the trap for ease of use. The trap module comes in two sizes: 4" x 4" x 17" or 5" x 5" x 24". Each is constructed of 1" x .5" mesh. The door spring is non-rusting stainless steel.

Mount over an active squirrel hole using fender washers and drywall screws through the flanges for anchoring points. These can capture up to 3 gray squirrels at a time.

The Multi-Catch Rodent Trap by WCS is specifically designed for capturing chipmunks, flying squirrels, red squirrels, norway and roof rats. It measures 20"L x 12"W x 6"H. It has an interior bait chamber and comes complete with a wire mesh bait basket to place your bait into and then lock it into place through the top-loading door (seen in the photo).

The multi-catch rodent trap has two counter-balanced doors, one at each end of the trap, the animal in their attempt to gain access to the bait opens the door, and is let into the trap and the door closes behind them. The bait is protected and remains intact so the traps just keeps catching.

There is a clean out door at one end for easy release or emptying of the trap.

Trap purchase includes 1oz. of pure Apple Essence.

This is the all wooden rabbit trap specifically designed for capturing rabbits that refuse to go into a wire cage. The simple design was "borrowed" from the Penn. Game Commission who published a document on capturing cottontail rabbits.

Anyone who has tried to get a rabbit to go into a wire cage knows that it isn't that easy. Rabbits seem to be more comfortable entering a wooden box.  The back of this trap is wire mesh so you can see inside after the wooden door has closed.

Like a see-saw, the rabbit walks up the incline inside the trap, towards the bait, and then their weight tilts the wooden pan of the trap forward and the door closes behind them. It is recommended that you bait the trap with apple slices. As an added attractor, the All Wooden rabbit trap comes complete with 1 oz. of pure Apple Essence. Use a drop of apple essence every 4 - 6 inches and lead the rabbit right into the trap.

The all wooden rabbit trap measures 24" x 7" x 8.5" and is constructed of 3/4" pine. You could stain the exterior (ONLY) with a green stain or allow the trap to weather to give it the "aged" look.

The Pigeon LP (low profile) is a perfect trap for those situations where catching 10 - 12 birds at a time is the goal. This trap was made to fit into small spaces such as ledges, patios, billboard catwalks, terraces, etc. This trap measures 24"L x 12"W x 7"H and is constructed of 1" x .5" mesh to prevent hawks from feeding on the captured birds.

The Pigeon LP has two (2) bobbin-type doors, each with a unique "foot" on the bobbins preventing them from becoming jammed once birds are captured and push against them.

Very easy to remove captured birds by reaching into the Pigeon LP with a gloved hand and removing them through one of the entry doors. For those locations which require discretion it is very easy to slide the entire cage into a cloth bag or grain sack for easy, out of sight, transport.

DUE TO THE DIMENSIONS OF THIS TRAP IT SHIPS UPS OVERSIZE. 

Features:

• 7 Panels, NOT 6 as others have. The 7th panel is used to divide the trap in half when removing birds.
• Improved Hook & Eye at each panel end for connecting the sections easily.
• Spring-loaded hooks to hold the top panels and door in place.
• Last, but certainly not least, bobbin doors which are 3 times thicker in diameter and much more rigid than others on the market. These WILL NOT bend and jam, preventing birds from entering.  

Specifications:

• 48"L x 36" W x 24" H
• Weighs 35 pounds
• Can hold up to 65 birds

Called the No-See'Um Chimney Trap because it fits right down into the chimney flue and is hidden from sight. The No-See'Um fits both 9 x 13 and 13 x 13 chimney flues. The trap itself measures 9"W x 5"H x 42"L.

The body of the No-See'Um is 1" x 1" galvanized mesh and will deliver years of service. The doors at both ends of the No-See'Um are constructed of sturdy 10.5 gauge 1/2" x 2" mesh.

There is a flange of the 10.5 gauge material at the bottom end which expands against the side of the chimney to funnel the raccoon into the trap.

Please Note: This trap will NOT fit in a 9 x 9 chimney flue.

This Floating Muskrat Trap is the most innovative trap for muskrat on the market today. There is essentially no set-up required; the trap is sturdy, light-weight, and simple to use. Because only a foot of water is required to set the trap it can be used anywhere from shallow wetlands to the middle of a pond or lake.

Overall the trap is 18L”x 16W”x 20H” and is made of 1” by 1” galvanized wire mesh and contains two compartments. It weighs only 9 pounds and the floatation foam is located inside the trap to make it more durable and resilient. The trap has a 7 inch floating platform that the muskrat will comfortably rest on. From the platform the muskrat will smell the bait inside the trap and enter the one-way door. Once the muskrat enters the trap there is no way for it to get back out. The capture is now in a 7 inches high compartment above water. There is plenty of room for the rest of the family to enter as well.

Another spring loaded one-way door, in the middle of the trap, leads to an underwater compartment that is 13 inches tall. For lethal capture, leave the door free to open so captures enter the bottom chamber and are contained underwater. For live capture, wire this door open so the muskrat can move freely from the top to the bottom of the trap. The second compartment door can also be wired shut so muskrat can not move down to the second chamber below water.

There are two clean-out doors, one for the top compartment and one for the bottom. Great for use around golf courses, condo developments, corporate parks where the use of conventional traps is discouraged.

30-lb dimensional shipping weight.