• Does Not Harm Birds!
• Mild Electric Jolt Changes Birds Habits!
• Patent Pending "Anti-Arcing" Design means the Ultimate in Safety!
• Completely Flexible - Can bend 360 degrees without Compromising the Product Integrity!
• Lowest Profile / Virtually Invisible!
• Only 1/4" High at the Highest Point!
• Super Light - 100' Kit Weighs Only 15 Pounds!
• 100' Kit Contains All Installation Hardware Needed...No Need to Buy Separate Hardware / Components
• Water Proof / Snap Fit Connections make it the Safe and Easy Shock System to Install
• Choose your desired color.

Options:
Color Black Grey Stone Terra Cotta

100’ of Bird Jolt track - Available in Black, Grey, Stone or Terracotta.

Please select your desired color.

Options:
Color Black Grey Stone Terra Cotta

This kit includes:

• 100 ft of STONE Shock Track
• Mounting Clips (20 pack)
• Blue T-Tap Quick Disconnect (20 pack)
• Red Quick Disconnect (20 pack)
• Lead-In Wire (20 ft roll)
• Copper Crimp

Grey Track Kit

Black Track Kit

Shock Track for Birds is low profile, virtually invisible and is effective on all species of birds. Its patented design prevents water from “damming”/building up behind it, and creating mosquito habitat and eventually shorting out the system.
Shock Track is super flexible, and will turn, corner and bend in any direction. Shock Track for Birds does not require any separate hardware or labor for cornering. It is fast and easy to install, and attaches easily on any surface (concrete, brick, wood, etc.)

Shock Track for Birds is low profile, virtually invisible and is effective on all species of birds. Its patented design prevents water from “damming”/building up behind it, and creating mosquito habitat and eventually shorting out the system.
Shock Track is super flexible, and will turn, corner and bend in any direction. Shock Track for Birds does not require any separate hardware or labor for cornering. It is fast and easy to install, and attaches easily on any surface (concrete, brick, wood, etc.)

Shock Track for Birds is low profile, virtually invisible and is effective on all species of birds. Its patented design prevents water from “damming”/building up behind it, and creating mosquito habitat and eventually shorting out the system.
Shock Track is super flexible, and will turn, corner and bend in any direction. Shock Track for Birds does not require any separate hardware or labor for cornering. It is fast and easy to install, and attaches easily on any surface (concrete, brick, wood, etc.)

100’ of Bird Jolt Lead-in Wire.  Please select color.

Options:
Color Black Grey Stone Terra Cotta

Direct electric charger - Charges up to 1,000 ft of Shock Track.  Pictured on left.

Solar unit that will charge up to 500 feet of Shock Track. Pictured on right.

Connects the lead-in wire from the charger to the track.  10 connector loops.

100 Copper Crimps per pack.

30 Shock Track Mounting Clips - Use every 3’ on the track.

Bi-Lingual warning labels, which should be placed every 10ft along your track system.

Waterproof steel box for electric chargers.

An excellent tool for any flat surface, where total exclusion is the goal, and low visibility is key. Ideal for parapets, roof peaks, beams, ledges, etc. Other features include:

• Fast installation
• Flexible - Conforms to any surface shape
• Least visible - Only 1/4" high and colors match the building
• Most effective - Shock teaches birds to stay away
• Long lasting - Made from the best materials, will protect for years
• Cost effective - Best deterrent for the price per foot
• Each 50 ft. roll comes with 11 straight and 9 corner connectors. Enough to make 25 connections.

50-feet of Black Track & Connectors
 

50-feet of Beige Track & Connectors

50-feet of Grey Track & Connectors

50-feet of Red Track & Connectors

Twisted copper, 14 gauge double wire is easy to cut, strip and crimp. Available in three colors to match your job.

50-foot roll of Black Wire

50-foot roll of Gray Wire

50-foot roll of Beige Wire

Smaller and black for a less visible, tighter job.  100 per pack.

Kit includes 100 male and 100 female connectors and 50 piggyback connectors. Enough for 25 junctions.

Flex Track straight connections - Lay the track in the opening and snap the lock-clamp in place. 25 connections per bag.

USE THESE FOR CORNER CONNECTIONS AS WELL - Simply cut away the plastic brace and swing open the corner.

Quick Tap Jumpers - Connect parrallel tracks together, or connect track to the charger unit. 30 per bag.

Corner Connection Kit - Comes with 100 male and 100 female connections.

Female Snap Tap Track Connector

Attach these to the track and the building.  Flashing indicates the system is functioning properly.  Can be seen from a distance at night.

Make sure your track system is sending the correct power all the way down the track. Tester reads in 100-volt increments.

This charger powers up to 500 feet of track. Plug into a dry power source and mount indoors. Features positive and negative wing-nuts for easy connections.

Input Voltage: 110-120 Vac
Output Voltage: 1.2kV +/- 20%

This charger powers up to 500 feet of track. It is weatherproof and can be mounted outside - so long as the plug itself is in a weatherproof housing.

Input Voltage: 120 Vac
Output Voltage (max): 9kV +/-

Charge up to 2,500 feet of track!

This charger is weatherproof, but must be plugged into a weatherproof receptacle.  It features a blinking indicator light when operating.  Powerful enough for most jobs.

This battery charges up to 200 feet of track. It is ideal for small jobs such as signs that can’t justify the cost of a large charger. Two D-Cell batteries will power the system for two months.

This powerful charger is capable of handling up to 1,000 feet of Flex-Track. It requires specific installation methods and the use of a digital track tester. This solar powerhouse supports up to 1,000 feet of track. It provides plenty of shock and can be installed anywhere that gets several hours of sunlight every day.

This is a replacement battery sold seperately for the 12v. solar chargers.

This charger powers up to 500 feet of track and is ideal for smaller projects. It also features connectors on the bottom and an on/off switch. Ideal for smaller projects.

Input Voltage: 12Vdc

Charge solar charger batteries quickly or during extended periods of cloudy weather.

Clear, bold, plastic warning labels should be placed prominently. Glue or screw to the ledge or side of the building.

10 Warning Labels

The correct tool for lead-wire and jumper wire.

This elegant tool easily strips wires, completely.  It grabs, cuts and pulls the wire, you just squeeze.  Use the #10 or #8 opening.

Cut through the PVC and stainless steel effortlessly.

Solid connections are a must for a long-lasting application. This tool delivers the perfect crimp.

50 supports per pack.

Flex Track Roof Ridge Supports make it easier to glue down Flex Track on roof peaks.  Glue supports to the roof peak, then glue Flex Track to the roof and supports.