Everything you need to get started in the lucrative business of bird control.

Available in galvanized and stainless steel. Stainless Steel recommended for most installations. 2,500 rings per pack.

2,500 Galvanized Rings
 

2,500 Stainless Steel Net Rings
 

1/2" Stainless Steel Pneumatic Tool Rings - 10,000 per box

3/4" Galvanized Pneumatic Tool Rings - 10,000 per box

Galvanized net rings (pictured right) for the battery-operated net ring tool. 10,000 rings per box.

Galvanized net rings, coated in black PVC, for the battery-operated net ring tool. Ideal for low visibility applications. 10,000 rings per box.

2,500 9/16-inch galvanized net rings for use in the Stanley "Ringer" Net Ring Tool.

2,500 9/16-inch STAINLESS STEEL net rings for use with the Stanley "Ringer" Net Ring Tool.

The standard tool for attaching netting to the cable, it accepts a cartridge of 50 rings for fast and easy use. Order 2 tools per job.

This Stanley Ringer Net Ring Tool uses a 9/16-inch net ring and has a handle-like grip that helps eliminate hand, wrist and forearm fatigue when the job requires a lot of net rings.

This fast operating tool is a must on large netting projects. It will save you time and money. Runs off a compressor and holds 100 rings.

Requires a 95 PSI-capable compressor.

These fast operating Stanley tools are a must on large netting projects.  They will save you time and money.  They run off a compressor and hold 100 1/2-inch rings at a time.  Pneumatic rings are packed in 10,000 rings per box.

• Fast and reliable
• Agile nose gets into tight spaces
• Holds 100 rings

This tool is developed with a sealed barrel to virtually eliminate sound.  It can be used near or in an occupied building during normal daytime hours with no hearing discomforts.  The tool has no live load in the chamber until indexed onto the surface.  The spacer system virtually eliminates fish hooking, spaulding and bending.  The spacer cushions kickback with minimum recoil.  The tool can be used on poured concrete, steel and masonry joints.

10 Small Stainless Steel Turnbuckles - for use with Stainless Steel Cable.

10 Medium Stainless Steel Turnbuckles - for use with Stainless Steel Cable.

10 Large Stainless Steel Turnbuckles - for use with Stainless Steel Cable.

These high quality ferrules are designed for 5/64" cable. Aluminum for galvanized cable and copper for stainless steel. Two ferrules should be used per cable loop attachment.

100 1mm Copper Ferrules

Heavy duty copper ferrules for use on oversized or extra-heavy applications. If heavy forces from wind or snow are anticipated this heavy duty hardware should be considered.

250-ft Galvanized Steel Cable

500-ft Galvanized Steel Cable

500-ft Stainless Steel Cable

Heavy duty 5/32 cable for oversized or extra-heavy applications. Great for use where high wind and snow may be expected.

Use to properly secure your ferrules to the cable. USE 2 FERRULES PER LOOP.

The sharpest, longest lasting and easiest tool to use for cutting heavy-duty cable.

10 Stainless Steel Eybolts

For steel up to 2" thick. Bolt on an I-beam or flat steel and attach your cable or turnbuckle directly to it.

10 SS Girder Clamps

Your best bet for larger net installations, this clamp can hold up to 630 pounds of tensioned weight. Bolt to an I-beam or other steel structure and run your cable inside the jaws. Opens up to 2".

4 Heavy Duty Steel Clamps

10 Stainless Steel M6 Netbolts

10 Galvanized M8 Netbolts

10 Stainless Steel Mini Netbolts

This versatile, stainless steel bracket can be used as an end or intermediate attachment, and installed as either a permanent fixture or as a quick release cable holder.

100 Cable Brackets

This strong, hammer-on clip allows you to attach cable to hard-to-drill surfaces. Hammer the clip onto the edge of an I-Beam with the cable running through the jaws (not through the hole), and your cable is secure.

100 3/32"-9/64" Galvanized Girder

100 1/8" - 1/4" Galvanized Girder Clips

100 5/16" - 1/2" Galvanized Girder Clips

Constructed of high quality, zinc-plated steel, the Hilti Loop is an easy to use attachment for stone, concrete and brick. Drill a hole and hammer it home. Open option for removable nets.

100 CLOSED Loops

100 OPEN Loops - Pictured on right

Stucco is one of the most challenging substrates for bird control. This durable plastic attachment affords a solid base for the screw eye. Drill a 3/8" hole, insert the Kwik Tog so it expands behind the stucco.

50 Kwik Togs

100 Plastic Anchors for lag screws.

Screw directly into wood, or use with an anchor for masonry.

100 Small Stainless Steel Screws

100 Large Galvanized Screws

Drive lag screws into wood and plastic anchors with this tool that fits into the chuck of your hand drill.

100 Small Galvanized Screw Eyes

20 Small Stainless Steel Screw Eyes
 

20 Stainless Steel HD Screw Eyes

Ideal for cable ends and corners when attaching in wood.

50 Galvanized HD Screw Eyes

Fits into the chuck of your power drill and allows you to drive small and heavy duty screws into wood fast and easy. Just get the eye started, slip the driver over the loop and screw it in.

This hammer-in attachment can be used in stone, concrete or solid brick. Does not require a plastic anchor sleeve, the bent shaft holds it securely in place. Zinc coated.

100 Net Spikes

10 magnets per pack.

Net Magnets are new intermediate attachments for metal substrates.  They are extremely quick to secure in place and can be used for following contours of a metal substrate, with or without wire cable.  Cable can be retained under the bridge or passed through the hole.

10 Magnets Per Order

Net Magnets are new intermediate attachments for metal substrates. They are extremely quick to secure in place and can be useful for following contours of a metal substrate, with or without wire cable. Two models available. Neither magnet is anywhere near as strong as an actual anchor drilled into the surface, so use caution when using these. Use for small sections of netting under little tension. Light duty magnets exert 16lbs. of force each. The inverted clips face each other so you can simply push the netting or cable into the opening. It's also easy to open the clip, for easy access.

Sel-adhering velcro pads for small net jobs where drilling is not an option. Clean and prep the surface thoroughly before installing.

100 Black Net Anchors

Use for invisible seams and to make minor repairs.

500-foot Black Net Twine

Zippers can be net-ringed into the netting to create any sort of an opening. Heavy duty marine construction insures long-life.

1-foot Black Zipper

Options:
Size Enter Zipper Length

6-foot Stone Zipper
 

Options:
Size Enter Zipper Length

Options:
Size Enter Zipper Length

The easy to handle Flexible Net Frame is designed to support netting away from protruding and hanging features such as statues, lights and signs.  Smooth curves can be formed to allow circular, oval or arched windows to be proofed more discreetly and with fewer fixings than using wire cable.  The rods can also be threaded through net to form access hatches.  The Flexible Rods can be fitted directly into the substrate using Red Wall Plugs.

Package of 10 flexible rod tensioner joint sleeves.

Package of 10 Flexible 'T' Connectors for the Flexible Rod Tensioner System.

These allow you to fit the Flexible Rod Tensioner System into different substrates.  Package of 100 wall plugs.

Telescoping poles can be used to build raised netting systems. The poles can be used to keep the center cable higher (like a tent), or to raise a whole net system above a flat roof, or a roof covered with HVAC equipment.

Hilti's powder-actuated tolls are powered by easy-to-use shot cartridges. Simply insert the cartridge up through the bottom of the tool, and they are in place and ready to go. Bird Barrier carries the heavy charge (red) because the tool is adjustable and can be backed down to much less power if necessary.

10 Hilti Cartridges

Used to fasten Bird Barrier brackets and clips to different metals.  Small screw uses 1/4" nut driver; large screw uses 5/16" nut driver.

100 Small Stainless Steel Self Tapping Screws.

12mm Drill Bit

A heavy-duty scissor for cutting bird netting.