For use with stainless steel posts or split spins. Ideal for drilling into masonry. Use 6.5mm drill bit. 100 pieces per pack. Price shown is for entire pack.

Use as an intermediate attachment for bird netting. Installs easily into concrete, wood, masonry, stone, brick, etc. A strong, low profile system. Insert the anchor rivet into a pre-drilled hole and hammer in the stainless steel split pins. 100 pins per pack.

For use with stainless steel posts or split spins. Ideal for drilling into masonry. Use 6.5mm drill bit. 100 pieces per pack. Price shown is for entire pack.

Use as an intermediate attachment for bird netting. Installs easily into concrete, wood, masonry, stone, brick, etc. A strong, low profile system. Insert the anchor rivet into a pre-drilled hole and hammer in the stainless steel split pins. 100 pins per pack.

Stainless steel girder clamp for surfaces up to 2" thick.

Use copper ferrules if you’re using stainless steel cable. Always use 2 ferrules per attachment. Use 1/16" ferrules with 1/16" cable.

Use copper ferrules if you’re using stainless steel cable. Always use 2 ferrules per attachment. Use 1/16" ferrules with 1/16" cable.

Use copper ferrules if you’re using stainless steel cable. Always use 2 ferrules per attachment. Use 3/32" ferrules with 3/32" cable.

Use copper ferrules if you’re using stainless steel cable. Always use 2 ferrules per attachment. Use 3/32" ferrules with 3/32" cable.

Small GALVANIZED turnbuckle for cable runs of 25 feet or less. 10 pieces per pack. Price shown is the pack price.

Medium GALVANIZED turnbuckle for cable runs of 75 feet or less. 10 pieces per pack. Price shown is the pack price.

Large GALVANIZED turnbuckle for cable runs of 75 feet or more. 10 pieces per pack. Price shown is the pack price.

Small STAINLESS STEEL turnbuckle for cable runs of 75 feet or less. 10 pieces per pack. Price shown is the pack price.

Large STAINLESS STEEL turnbuckle for cable runs of 75 feet or more. 10 pieces per pack. Price shown is the pack price.

Use galvanized Hog Rings for normal areas of installation.  Use stainless steel Hog Rings for areas near salt water, chemicals, etc.  Use one Hog Ring per square of netting to attach to cable.

Use galvanized Hog Rings for normal areas of installation.  Use stainless steel Hog Rings for areas near salt water, chemicals, etc.  Use one Hog Ring per square of netting to attach to cable.

Use galvanized Hog Rings for normal areas of installation.  Use stainless steel Hog Rings for areas near salt water, chemicals, etc.  Use one Hog Ring per square of netting to attach to cable.

Use galvanized Hog Rings for normal areas of installation.  Use stainless steel Hog Rings for areas near salt water, chemicals, etc.  Use one Hog Ring per square of netting to attach to cable.

Order at least 2 of these tools for each job, as they often wear out fast.

The Pneumatic Hog Ring Tool from Stanley Bostitch uses compressed air to quickly and efficiently install hog rings around a net installation.  Fast operating - saves time and money.  Ideal for large netting jobs.

Medium GALVANIZED eyebolt for anchor attachments in concrete or masonry. For cable runs of 75 feet or less. 10 pieces per pack. Price shown is the pack price.

Medium STAINLESS STEEL eyebolt for anchor attachments in concrete or masonry. For cable runs of 75 feet or less. 10 pieces per pack. Price shown is the pack price.

Large GALVANIZED eyebolt for anchor attachments in concrete or masonry. For cable runs of 75 feet or more. 10 pieces per pack. Price shown is the pack price.

Corner attachments used for small cable runs of less than 20’.  Use galvanized bolts for normal areas of installation.  Use stainless steel for areas near salt water, chemicals, etc.

Corner attachments used for small cable runs of less than 20’.  Use galvanized bolts for normal areas of installation.  Use stainless steel for areas near salt water, chemicals, etc.

Low profile, "J" hook blends in with the construction materials of all buildings. 1.25" Stainless Multi-Purpose Cable Bracket (NO HILTI PINS).

Low profile, "J" hook blends in with the construction materials of all buildings. 1.25" Stainless Multi-Purpose Cable Bracket (WITH HILTI PINS).

Low profile, "J" hook blends in with the construction materials of all buildings. 1.25" Stainless Multi-Purpose Cable Bracket (WITH HILTI PINS FOR STEEL).

Six inch (6") roof tile bracket slides under spanish tiles - Pictured at top.

Stainless net clip for closing cuts in 3/4" netting, or creating access points - (Pictured on bottom)

Stainless net clip for closing cuts in 2" netting, or creating access points - (Pictured on top)

For large jobs over 100 ft in length, use 3/32 cable. For smaller jobs under 100 ft in length, use 1/16 cable. GALVANIZED CABLE

7/7 GALVANIZED stranded cable. For jobs under 100 feet in cable length. For jobs over 100 feet in cable length, use 3/32 cable.

For large jobs over 100 ft in length, use 3/32 cable. For smaller jobs under 100 ft in length, use 1/16 cable. STAINLESS STEEL CABLE

7/7 STAINLESSS STEEL stranded cable. For jobs under 100 feet in cable length. For jobs over 100 feet in cable length, use 3/32 cable.

For large jobs over 100 ft in length, use 3/32 cable. For smaller jobs under 100 ft in length, use 1/16 cable. GALVANIZED STEEL CABLE

7/7 GALVANIZED stranded cable. For jobs under 100 feet in cable length. For jobs over 100 feet in cable length, use 3/32 cable.

For large jobs over 100 ft in length, use 3/32 cable. For smaller jobs under 100 ft in length, use 1/16 cable. STAINLESS STEEL CABLE

7/7 STAINLESS STEEL stranded cable. For jobs under 100 feet in cable length. For jobs over 100 feet in cable length, use 3/32 cable.

Ideal for cutting through all sizes and types of cable - fast.  Long lasting and easy to use.  Secure locking latch and easy grip "user friendly" handle.

Alternative attachment to running cable to connect netting to structure.  Recommended for small netting runs (25 sq. ft. or less).

100 Clips Per Pack

S-Clips are intermediate attachments that are secured to the perimeter surface on one end and straining wire is strung through the other.  Hilti pin clip available for concrete or steel surfaces.

Allow access to lights, air conditioners, or any other reason an opening may be required after the net is installed. Install zippers LAST, after net has been completely installed, by hog-ringing the fabric of the closed zipper to the netting. Once attached, unzip the zipper and cut the exposed netting down the middle of the zipper. Close the zipper and you're done.

Options:
Color Black Zipper Stone Zipper

24-inch BLACK Zipper

Allow access to lights, air conditioners, or any other reason an opening may be required after the net is installed. Install zippers LAST, after net has been completely installed, by hog-ringing the fabric of the closed zipper to the netting. Once attached, unzip the zipper and cut the exposed netting down the middle of the zipper. Close the zipper and you're done.

Allow access to lights, air conditioners, or any other reason an opening may be required after the net is installed. Install zippers LAST, after net has been completely installed, by hog-ringing the fabric of the closed zipper to the netting. Once attached, unzip the zipper and cut the exposed netting down the middle of the zipper. Close the zipper and you're done.

Options:
Color Black Zipper Stone Zipper

48-inch BLACK Zipper

Allow access to lights, air conditioners, or any other reason an opening may be required after the net is installed. Install zippers LAST, after net has been completely installed, by hog-ringing the fabric of the closed zipper to the netting. Once attached, unzip the zipper and cut the exposed netting down the middle of the zipper. Close the zipper and you're done.

Allow access to lights, air conditioners, or any other reason an opening may be required after the net is installed. Install zippers LAST, after net has been completely installed, by hog-ringing the fabric of the closed zipper to the netting. Once attached, unzip the zipper and cut the exposed netting down the middle of the zipper. Close the zipper and you're done.

Options:
Color Black Zipper Stone Zipper

10-foot BLACK Zipper

Allow access to lights, air conditioners, or any other reason an opening may be required after the net is installed. Install zippers LAST, after net has been completely installed, by hog-ringing the fabric of the closed zipper to the netting. Once attached, unzip the zipper and cut the exposed netting down the middle of the zipper. Close the zipper and you're done.

Designed to attach cable to I-beams/steel surfaces. Hammer the clip directly onto the I-beam to secure the cable to the surface. Galvanized attachments come in 4 widths to accommodate any surface width.

Designed to attach cable to I-beams/steel surfaces. Hammer the clip directly onto the I-beam to secure the cable to the surface. Galvanized attachments come in 4 widths to accommodate any surface width.

Designed to attach cable to I-beams/steel surfaces. Hammer the clip directly onto the I-beam to secure the cable to the surface. Galvanized attachments come in 4 widths to accommodate any surface width.

Designed to attach cable to I-beams/steel surfaces. Hammer the clip directly onto the I-beam to secure the cable to the surface. Galvanized attachments come in 4 widths to accommodate any surface width.

Ideal for wood and sheet metal.  Low profile, stainless steel.  Secures easily with self-tapping screws.

1/4" diameter net spike.  Used for intermediate attachment of bird netting cables.

3/16" diameter net spike.  Used for intermediate attachment of bird netting cables.

Use this tool to properly secure & crimp ferrules used in installing bird netting cable systems.